eSUN Filament ePA-CF – Natural (1.75mm)

eSUN Filament ePA-CF in the color Natural was developed based on nylon 6/66 copolymer, adding 20% carbon fiber greatly enhances the strength, rigidity, and toughness of nylon, and can replace metal materials on many occasions. Self-lubricating wear resistance makes it suitable for printing gears. High toughness and impact resistance make it suitable for printing durable parts. High-temperature resistance, heat deformation temperature up to 155℃. Low shrinkage, it is not easy to warp and crack when printing, and the surface of printed models is matte and delicate. Technical Specification: Package size: 1 kg Density: 1.24 g/cm3 Heat Distortion Temp (℃,0.45MPa): 155 Tensile Strength: 140 MPa Flexural Strength: 140 MPa EAB: 10.61% Flexural Modulus: 4363 MPa Impact Strength: 18.67 kJ/㎡ Extruder Temp: 260 – 300℃ Bed Temp: 45 – 60°C Printing Speed: 40 – 100mm/s Heated Bed: Optional Note: Before printing, we suggest drying the filament for 12 hours at 70°C

Shipping costs vary depending on location and will be applied at the time of checkout.
Below you will find a breakdown of the rates for different locations: 

North America: $8.00
Canada: $35.00
Rest of the World: $55.00

We accept returns on the basis that the product has not been used and is in the same condition that was sent to you. The cost of return shipping will not be covered.